Why Do You Need to Maintain Excavator Accessories Regularly?

 Many people know that excavator accessories require long-term maintenance, but do not know their real purpose and importance. There are three main reasons for maintaining the excavator. One is to reduce the failure of the machine, thereby prolonging the service life of the machine; the second is to shorten the downtime of the machine; the third is to improve work efficiency and reduce operating costs. As long as the daily management of fuel, lubricating oil, water, and the air is done well, 70% of the failures can be avoided.

 

excavator accessories

 

Fuel Management

Different brands of diesel oil should be selected according to different ambient temperatures; diesel oil should not be mixed with impurities, lime soil, and water, otherwise, the fuel pump will be worn out prematurely; the paraffin and sulfur content in inferior fuel oil will cause damage to the engine; daily work After finishing, the fuel tank should be filled with fuel to prevent water droplets from forming on the inner wall of the fuel tank; before daily work, open the drain valve at the bottom of the fuel tank to drain the water; after the engine fuel is used up or the filter element is replaced, the air in the road must be exhausted. If your engine is Yanmar, then you can find its related accessories in LandTopMall, such as Yanmar 3tnv76 engine for sale in LandTopMall with high selling.

Grease Management

The use of lubricating oil reduces wear on moving surfaces and prevents noise. When storing the grease, dust, sand, water and other impurities should not be mixed in; use lithium-based grease G2-L1, which has good anti-wear performance and is suitable for heavy-duty conditions; when filling, try to squeeze out all the old oil. And wipe clean to prevent sand from sticking.

Maintenance of Filter Element

The filter element plays the role of filtering impurities in the oil or gas path, preventing them from invading the system and causing failure; various filter elements should be replaced regularly according to the requirements of the (operation and maintenance manual); when replacing the filter element, check whether there is metal attached to the old If metal particles are found on the filter element, diagnose and take improvement measures in time; use the pure filter element that meets the requirements of the machine. The filtering ability of the fake and inferior filter element is poor, and the surface and material quality of the filter layer do not meet the requirements, which will seriously affect the normal use of the machine. LandTopMall is a mature accessories sales mall with more than 8 years of accessories sales experience. Our products have been widely praised by customers all over the world, and we have professional accessories to serve you. The filter element suitable for the 4d32 engine is a popular product in our store. In addition, if your excavator needs to replace the filter element but you don't know how to choose, please call (+852) 63548665 for consultation.

 

excavator accessories

 

Excavator accessories are important components to maintaining the normal operation of excavators. As we all know, excavator accessories must be cleaned and maintained regularly. So, what is the cleaning method?

  1. First, remove the carbon deposits in the accessories. Since the carbon deposits will cause the machine to run slowly, it is very important to remove the carbon deposits. To remove carbon deposits, mechanical removal methods can be used, that is, scrapers or metal brushes are used to remove carbon deposits, but this method is not easy to remove carbon deposits, and it is easy to damage the surface of parts. 80~90℃, expand the carbon deposits on the parts and then use a brush to remove them.
  2. If there are too many oil stains in the accessories, it will directly affect the operational performance of the excavator. The method of removing oil stains should be scraped off with tools first. Generally, the effect of cleaning oil stains with hot cleaning fluid will be better. The commonly used cleaning fluids are synthetic detergents. And alkaline cleaning fluid, it should be noted here that aluminum alloy parts cannot be cleaned in strong alkaline cleaning fluid; non-metallic rubber parts should be cleaned with alcohol or brake fluid.
  3. The removal of scale is also indispensable. The chemical removal method is generally used to remove scale. The chemical solution for removing scale is added to the coolant. After the engine works for a certain period, the coolant is replaced. The commonly used chemical solutions for removing scale are: hydrochloric acid Descalers Caustic soda solution, hydrochloric acid solution, and phosphoric acid descaler are suitable for removing scale from aluminum alloy parts.

Welcome to LandTopMall to choose the right engineering accessories for you！

Comments

Post a Comment

Popular posts from this blog

Simple Introduction and Maintenance of Excavator Olecranon Shears

Image
 What are olecranon scissors? How to maintain the olecranon shears? Next, I will briefly introduce it to you. The olecranon shears are heavy-duty hydraulic shears, large cylinders, mounted on excavators for dismantling scraps such as scrap trucks, shears, steel, tanks, pipes, etc. These shears can be used in different work scenarios, including the dismantling of workshops, recycling of waste materials, etc., and can cut iron materials. Unique design and innovation guarantee olecranon shears for steel, cans, tubes, etc. The machine has high efficiency and strong cutting force, and its performance is more than 15% compared with ordinary hydraulic shearing machines. It is one of the larger shear forces in the hydraulic shearing of excavators.     The olecranon scissors can be used to cut waste materials. It can also be applied to the recycling of scrap metal materials, the recycling, and reuse of scrap steel, the dismantling of scrapped automobiles, etc. Realize 360-degree h...
Read more

YANMAR Europe well represented at Europe 2022

Image
  From 2 to 5 November 2022 will once again open its physical doors. Yanmar Europe will be there (Hall 1, station 224) to personally introduce visitors to the latest developments in ship engines. This is the first time we have exhibited together at the Joint Booth (Booth 1, Booth 227) with Nikofken, one of our marine engine service distributors in Yanmar, the Netherlands. Nikofken specializes in major repairs and spare parts sales of mainframe and auxiliaries. For 35 years, the company has been an important partner in Yanmar's dealer network. The Dutch market is important Yanmar's European headquarters is in Almere, making the Dutch home market an important one. As a result of their long-standing good relationship with Nikoverken, it was a logical decision that also significantly reinforced each other's advantages in European ports. Visitors can see and experience with their own eyes that the original Japanese Yanmar engine and real parts can also be fast and reliable in th...
Read more

Analysis Scheme of Common Fault Causes of Excavators

Image
  Why is it difficult to start the excavator in winter? It is not only determined by its technical conditions but also affected by the outside temperature. It is more difficult to start at a low temperature in winter, mainly due to the following reasons:   (1) In winter, the climate is cold, the ambient temperature is low, the viscosity of the oil increases, and the frictional resistance of various moving parts increases, which reduces the starting speed and makes it difficult to start.   (2) The capacity of the battery decreases as the temperature drops, which further reduces the starting speed.   (3) Due to the reduction of the starting speed, the leakage of compressed air increases, and the heat dissipation of the cylinder wall increases, which greatly reduces the temperature and pressure of the air at the end of compression, which increases the delay period of diesel ignition, and even cannot be burned in severe cases.   (4) The viscosity of diesel oil at lo...
Read more