What's the Reaction to a Broken Engine Connecting Rod Bearing?

 

What's the Reaction to a Broken Engine Connecting Rod Bearing?

The main manifestations of broken car engine connecting rod bearing are lack of car oil or no car oil, the engine crankshaft will suddenly report dead when the car engine is running so that the car engine can be immediately judged to be pulled; when the engine has car oil, the car engine After a long time, if the car engine is running, there will be a rattling sound of the car engine, and this noise will go with the sound of the oil, and the bigger the accelerator pedal, the louder it will be.

 

Symptoms of car engine Lava: the lack of lubricating car oil is more serious when the car engine is running; it is found that the car oil used in the car engine is moldy and cannot provide lubrication; the oil pressure is low or there is no oil pressure The car engine still runs; in the crankcase of the car engine Aluminum alloy powder with blocks was found in the engine oil of the ventilated engine; there was abnormal noise when the car engine was running; the long-term fast and long-term load working condition caused the lubrication of the rolling bearing to deteriorate and even damage. If you need connecting rod bushes for the Yanmar 3tnv70 engine, you can call (+852) 63548665 to contact LandTopMall's accessories experts for purchase.

 

connecting rod bearing

 

How to Judge the Abnormal Noise of the Connecting Rod Bearing?

Judgment method of the abnormal sound of connecting rod bearing: 1. Judging according to the different sounds emitted by the engine: when listening outside the engine, the sound is a short and solid "click, click" sound; 2. Listen at the oil filler, the sound is a crisp and loud "dang, dang" sound; 3. If the engine changes from idle speed to medium speed, the sound will be clearer, and the sound will be more prominent as the speed increases; 4. If the single-cylinder fire-off method is used to check, the sound weakens or disappears, indicating that the connecting rod bearing of the cylinder is making noise; 5. If the sound is mixed, there is a sound of "clucking, rattling" or "crashing, splashing", which can also be used to cut off. Fire inspection, if the sound is weakened after the single-cylinder is out of the fire, and then the double-cylinder continues to fire, the sound is weakened or disappeared, indicating that the multi-cylinder connecting rod bearing is worn and loose; 6. No matter whether the engine temperature is low or high, no matter at any speed In all cases, a serious and rhythmic "clang, clang" sound is emitted, and the cylinder head vibrates very strongly, and the same is the same during the fire-off or re-fire test, it can be concluded that the alloy layer of the connecting rod bearing bush is overheated and melted, and it should be removed immediately. Solution repair.

If your connecting rod bearing has an abnormal noise and needs to be replaced, you can contact LandTopMall's accessories experts and buy new accessories with good quality and low price. Recently, LandTopMall has received a lot of praise for its high-quality products, Yanmar 3tnv76 engine for sale in LandTopMall was the hottest product.

 

connecting rod bearing

 

What Are the Precautions?

  1. When installing the piston pin, carefully check whether the piston pin meets the regulations, and pay attention to the cleanliness of the surface of the parts. It is not necessary to be too tight or too loose during installation. 0.06mm.
  2. When operating in winter, crank the engine crankshaft several times first. After running, it is advisable to run at the standby speed. When the temperature of the water is upgraded to above 40°C, you can start driving.
  3. Apply high-quality lubricating grease and maintain high-quality regularly. If water seepage turns black, gray-black or there is waste, it should be replaced immediately.
  4. During driving, you need to pay attention to observing the burden of the car oil meter or the working condition of the alarm system. If there is any abnormality, it should be cleared immediately.
  5. Strictly implement the safety operation procedures, use the car reasonably, and minimize the overload operation of light-load and low-speed gears.

Comments

Post a Comment

Popular posts from this blog

Simple Introduction and Maintenance of Excavator Olecranon Shears

Image
 What are olecranon scissors? How to maintain the olecranon shears? Next, I will briefly introduce it to you. The olecranon shears are heavy-duty hydraulic shears, large cylinders, mounted on excavators for dismantling scraps such as scrap trucks, shears, steel, tanks, pipes, etc. These shears can be used in different work scenarios, including the dismantling of workshops, recycling of waste materials, etc., and can cut iron materials. Unique design and innovation guarantee olecranon shears for steel, cans, tubes, etc. The machine has high efficiency and strong cutting force, and its performance is more than 15% compared with ordinary hydraulic shearing machines. It is one of the larger shear forces in the hydraulic shearing of excavators.     The olecranon scissors can be used to cut waste materials. It can also be applied to the recycling of scrap metal materials, the recycling, and reuse of scrap steel, the dismantling of scrapped automobiles, etc. Realize 360-degree h...
Read more

YANMAR Europe well represented at Europe 2022

Image
  From 2 to 5 November 2022 will once again open its physical doors. Yanmar Europe will be there (Hall 1, station 224) to personally introduce visitors to the latest developments in ship engines. This is the first time we have exhibited together at the Joint Booth (Booth 1, Booth 227) with Nikofken, one of our marine engine service distributors in Yanmar, the Netherlands. Nikofken specializes in major repairs and spare parts sales of mainframe and auxiliaries. For 35 years, the company has been an important partner in Yanmar's dealer network. The Dutch market is important Yanmar's European headquarters is in Almere, making the Dutch home market an important one. As a result of their long-standing good relationship with Nikoverken, it was a logical decision that also significantly reinforced each other's advantages in European ports. Visitors can see and experience with their own eyes that the original Japanese Yanmar engine and real parts can also be fast and reliable in th...
Read more

Analysis Scheme of Common Fault Causes of Excavators

Image
  Why is it difficult to start the excavator in winter? It is not only determined by its technical conditions but also affected by the outside temperature. It is more difficult to start at a low temperature in winter, mainly due to the following reasons:   (1) In winter, the climate is cold, the ambient temperature is low, the viscosity of the oil increases, and the frictional resistance of various moving parts increases, which reduces the starting speed and makes it difficult to start.   (2) The capacity of the battery decreases as the temperature drops, which further reduces the starting speed.   (3) Due to the reduction of the starting speed, the leakage of compressed air increases, and the heat dissipation of the cylinder wall increases, which greatly reduces the temperature and pressure of the air at the end of compression, which increases the delay period of diesel ignition, and even cannot be burned in severe cases.   (4) The viscosity of diesel oil at lo...
Read more