What to Do if Your Car Overheats?

 

What to Do if Your Car Overheats?

Cars have advanced over time and newer vehicles typically have cooling systems that are sophisticated enough to pick up high temperatures and engage the fans to keep your engine the right temperature despite the weather. However, regardless of the year of your car, overheating is still a possibility. That is why it is important to be prepared and know what to do if you find yourself in said situation.

Car Overheats

Why is my car overheating?

There are various contributing factors that can cause a car to overheat. Leaks as well, as typical wear and tear, can cause an engine to overheat. Various driving conditions can also contribute to a cooling system failure, such as stop and go traffic on a very hot summer day here in Texas. Although, regardless of the reasons behind your engine overheating, the most important thing is how you react and handle the situation, as safety comes first.

 

To prevent this problem from happening your best bet is to make sure you are taking your car in regularly here in McKinney for an engine service. Keeping the various parts of your car in check and in proper functioning order will usually prevent such things from happening.

What should I do if I sense my car is overheating?

As a starter, you should always make sure you have coolant and a jug of water on hand. This will likely be a solution if your car is overheating. Take note that if you must top off the coolant or water while the engine is still a bit warm, you should do so while the car is still running and in neutral or park (of course with your brake on if there is no one else to sit in the driver’s seat).

 

#1 If you see that your temperature gauge is going up into the red zone or your car signals you that the temperature of your engine is too high, you should immediately turn off your air conditioner. Reason being that, your AC draws a lot of energy from your engine and turning it off will decrease your engine’s strain.

 

#2 If you notice that the problem is not getting any better, you should turn on your heater at full blast. This may seem to contradict and very undesirable on a hot summer day, but this enables some heat to transfer away from the engine and may save it from more permanent damage.

 

#3 If nothing is getting better still, you should pull over as soon as you can. Turn off your engine and pop your hood. Make sure to pop your hood from your driver’s seat and not by hand, at least until the engine has had a chance to cool down a bit. Usually, it takes about 30 minutes or more for the engine to cool down to the necessary point. Your next step may need to be calling a tow truck to bring your car to the experts here at Nortex Lube & Tune.

 

#4 Once your engine has had a chance to cool off you can proceed to check the coolant tank. If it is empty it is possible that your car has suffered a leak. If you look under your car and notice a puddle or dripping then it is likely the problem is, in fact, a leak. To top off you can use either coolant or water but remember that the water will only last you so long.

 

As for how to top off your radiator tank, you should carefully open up the radiator cap by placing a cloth over it firstly to protect your hand, and then tilt it away from you as it opens. You may then proceed to pour in the coolant or water. Remember, as mentioned above, to never pour cold water into an engine that is still hot as this can cause the engine to crack due to the sudden change in temperature.

Car Overheats

When your car needs replacement parts, LandKingParts is always your first choice. All our products are made from high quality materials and as a supplier of agricultural machinery parts, we can supply parts for almost any brand.such as Bobcat,John Deere,Case,Kobelco,Yanmar,Komatsu,New Holland,Mitsubishi,ect.

We carry out a great selection of cylinder heads, overhaul kits, injection pumps, turbochargers, radiators, oil coolers, water pumps, fuel pumps, mufflers and other engine parts. Browse our online catalog and choose the one that fits your needs.

If you are unsure of the model you require, please contact LandKingParts and we will get back to you as soon as possible.

Comments

Post a Comment

Popular posts from this blog

Simple Introduction and Maintenance of Excavator Olecranon Shears

Image
 What are olecranon scissors? How to maintain the olecranon shears? Next, I will briefly introduce it to you. The olecranon shears are heavy-duty hydraulic shears, large cylinders, mounted on excavators for dismantling scraps such as scrap trucks, shears, steel, tanks, pipes, etc. These shears can be used in different work scenarios, including the dismantling of workshops, recycling of waste materials, etc., and can cut iron materials. Unique design and innovation guarantee olecranon shears for steel, cans, tubes, etc. The machine has high efficiency and strong cutting force, and its performance is more than 15% compared with ordinary hydraulic shearing machines. It is one of the larger shear forces in the hydraulic shearing of excavators.     The olecranon scissors can be used to cut waste materials. It can also be applied to the recycling of scrap metal materials, the recycling, and reuse of scrap steel, the dismantling of scrapped automobiles, etc. Realize 360-degree h...
Read more

YANMAR Europe well represented at Europe 2022

Image
  From 2 to 5 November 2022 will once again open its physical doors. Yanmar Europe will be there (Hall 1, station 224) to personally introduce visitors to the latest developments in ship engines. This is the first time we have exhibited together at the Joint Booth (Booth 1, Booth 227) with Nikofken, one of our marine engine service distributors in Yanmar, the Netherlands. Nikofken specializes in major repairs and spare parts sales of mainframe and auxiliaries. For 35 years, the company has been an important partner in Yanmar's dealer network. The Dutch market is important Yanmar's European headquarters is in Almere, making the Dutch home market an important one. As a result of their long-standing good relationship with Nikoverken, it was a logical decision that also significantly reinforced each other's advantages in European ports. Visitors can see and experience with their own eyes that the original Japanese Yanmar engine and real parts can also be fast and reliable in th...
Read more

Analysis Scheme of Common Fault Causes of Excavators

Image
  Why is it difficult to start the excavator in winter? It is not only determined by its technical conditions but also affected by the outside temperature. It is more difficult to start at a low temperature in winter, mainly due to the following reasons:   (1) In winter, the climate is cold, the ambient temperature is low, the viscosity of the oil increases, and the frictional resistance of various moving parts increases, which reduces the starting speed and makes it difficult to start.   (2) The capacity of the battery decreases as the temperature drops, which further reduces the starting speed.   (3) Due to the reduction of the starting speed, the leakage of compressed air increases, and the heat dissipation of the cylinder wall increases, which greatly reduces the temperature and pressure of the air at the end of compression, which increases the delay period of diesel ignition, and even cannot be burned in severe cases.   (4) The viscosity of diesel oil at lo...
Read more